Skip to main content

First week in new Job

Hi
    I don't know how to begin. Any way let's begin from beginning of this way. Firstly i want to  thank to all who reached, interviewed, offered this job. Finally after about 6 month i'm here in huge company in the world . Why it took about 6 month after offer. Because visa process took very long time. Once i get visa, bought ticket to fly from Kutaisi (Georgia) to Prague (Czechia) in 25th of January. Staying one night in Prague and tomorrow i came to Brno. And new life began. 3rd of February was New Comers Day which all new employees who begin this day attended this event. Event took about 4 hours where beautiful girls from HR team give us information about company process. In the end team leader of our team took us to our workplace with our new laptops. While writing this post it's my 5th day. Everything goes as expected....

Comments

Popular posts from this blog

Reset root pass in ESXi 5.5

    In this post i will show how to reset root password in ESXi 5.5. For this first we need any bootable linux distributor. In my example i used Ubuntu 16.04.     Boot from Ubuntu disk. Select try Ubuntu, wait for loading. After full loading open Terminal. Type fdisk -l for list all partitions hypervisor/system image is located on the first 250 MB partition (/dev/sda5) which contains the state.tgz file. Mount /dev/sda5 to /mnt sudo -s mount /dev/sda5 /mnt. Go to the /mnt cd /mnt . Copy state.tgz to /tmp folder cp state.tgz /tmp , cd /tmp. Unarchive state.tgz tar xzf state.tgz then   tar xzf local.tgz Go to the /etc directory in /tmp folder  cd etc/ . For deleting resetting password open shadow file with nano shadow  delete the password hash of ESXi root account. Close nano editor. Readd etc/ folder to local.tgz : tar czf local.tgz etc after it readd local.tgz to state.tgz: tar czf state.tgz local.tgz . Copy state.tgz mnt/ folder: cp state.tgz /mnt/ . umount /mnt  .

Install Cisco AnyConnect on Ubuntu

Hi   In this post i will show how to  install Cisco AnyConnect on Ubuntu 19.10. First download soft from below link or from cisco.com site https://ftp.tugraz.at/tu-graz/vpn/ Once archive file  downloaded, extract it:     $ tar xvf anyconnect-predeploy-linux-64-3.1.14018-k9.tar.gz cd extracted folder:     $ cd anyconnect-3.1.14018/vpn/ install  Cisco AnyConnect using this command:     $ sudo ./vpn_install.sh After installing you can open application. If application not opening. You have to install libpangox-1.0-0 to solve problem:     $ sudo apt-get install libpangox-1.0-0 That's all.